RIP ROUTING

RIP V2 ROUTING

---------------------------------------------- 

Guidelines

1. Perform basic configuration +

2. Direct RIP to only send unicast updates to the zone router.

3. Configure MD5 AUTHENTICATION between neighbors.

4. Propagate the DEFAULT ROUTE from HQ.

5. Disable Auto Summarization.

6. Routing Updates Should not propagate to the ISP or the LANS

7. Alter RIP to prefer the longer route within the zone.

8. Ensure that the LANS do not propagate beyond HQ to the other regions.

9. Verify connectivity pings should work from end to end.

DOWNLOAD - .NET FILE, ROUTER CONFIGS

VLAN Trunking GNS3 Lab - 802.1Q - Router On A Stick

This lab is not mine, but it is a very good exercise into understanding the basics of  vlan´s.
A Great VLAN Trunking - 802.1Q - Router On A Stick  @ www.gns3-labs.com

STATIC & SUMMARY ROUTING

Objective :

1. PERFORM BASIC ROUTER CONFIGURATION
2. CONFIGURE TO SEND CDP UPDATES ACROSS SERIAL LINKS ONLY
3. CONFIGURE STATIC ROUTES WITH NEXT HOP or EXIT INTERFACE
4. CONFIGURE DEFAULT ROUTES.
5. CONFIGURE SUMMARY ROUTES FOR THE LAN NETWORKS.
6. VERIFY CONNECTIVITY. ALL HOSTS SHOULD BE ABLE TO PING ALL THE OTHER HOSTS & THE SERVER.

Download - .net file, Router Configs, VPCS Startup

Hello Fellow Internauters & CCNA Aspirers.

During my CCNA pursuit I have spent hours "googling¨ for LABS that go beyond the normal curriculum of the course in order to get a broad understanding of the concepts and prepare me for my next level (CCNA specialization / CCNP ). The many forums and blogs have helped me a lot. In these forums i found posts relating to specific problems. Inspired by the lack of coherency for a novice, during my studies I have developed the following labs for each stage of learning. 

Thanks for your interest